Creality Carborundum Glass Platform for Ender 3 V2 / Ender 5 Pro /Ender 5 Plus/Ender 6/ CR-10S Pro V2/CR-10 V2/3/CR-6 SE

Features 1, Easy to remove model with 1 minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily. 2, High viscosity and strong adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion. 3, 0.15MM of flatness recovery model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness. 4, Wear-resistant and scratch-resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc. 5, High hardness and durable: This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness. Size 235x235mm suit for Creality Ender 3/ 3 Pro / 5 / 5 Pro / CR-20 / CR-20 Pro 3D printer Size 377x370mm suit for Creality Ender 5 Plus Size 290x290mm suit for Creality Ender 6 Size 280x280mm suit for Creality Ender 7 Size 255x245mm suit for Creality CR-6 SE Size 310x310mm, suit for Creality CR-10 or CR-10S 3D printer Size 320x310mm suit for Creality Ender-3 Max Neo / CR-10S PRO / CR-10 V2 / CR-10 V3 / CR-X / CR-X Pro / CR-10S PRO V2 / Ender-3 Max Size 310x240mm suit Creality CR-5 Pro Size 220x240mm suit Creality CR-200B Main advantage 1: When start printing, make the printed object not easy to wrap up 2:When finished printing, could let user easy to remove the printed objects 3:Could be apply to heating PCB directly, could start printing at once,don't need to stick any tape or glues,when leveled, replace most platform plate in the market . 4:Anti-scratch, high hardness,not easy to be broken,surface flatness is less than 0.2mm 5:Under temperature: -56°C to 350°C, the plate 0 expansion and 0 deformation User guide 1: Could fix the plate on the platform directly be clips 2: When fixed the plate, need to adjust the platform , leveling it and adjust the distance of nozzle to build plate, make sure the nozzle don't touch the plate at first printing 3:When use heated bed to print, the temperatue for materials PLA :60°C-65°C; ABS:110°C-125°C; PC:100°C-130°C; Nylon:90°C-110°C; TPU:50°C-65°C When print PLA or ABS, the first layer should with transparency outlook, if not, the printing may fail, please check as follows: A: The distance from nozzle to platform is too far, please adjust this distance to suitable distance B:They are oil or sweat splotch หากต้องการใบกำกับภาษีเต็มรูปแบบ 1.ใบกำกับภาษีจะแนบไปพร้อมสินค้าในกล่องพัสดุ 2.ตอนสั่งซื้อหน้าชำระเงิน ตรงช่องด้านล่างจะมีเขียนว่า “หมายเหตุ” ให้เขียนแจ้งความต้องการ เช่น ขอใบกำกับภาษีเต็มรูปแบบ 3.แล้วก็แจ้งข้อมูลที่จะให้ออกบิลทางช่องแชทร้าน 4.ใบเสร็จจะแนบไปพร้อมกับสินค้าในกล่องพัสดุครับ