Bambu Labs Bambu Cool Plate SuperTack

Description The Bambu Cool Plate SuperTack offers ultra-strong adhesion for PLA and PETG filaments with its innovative SuperTack coating - even at lower heatbed temperatures. No more adhesion problems or warping, even with large objects or surfaces with irregular shapes. Perfect adhesion: Eliminates adhesion problems and improves printing results. Less warpage: Ensures reliable stability for large-area printing. Longevity for greater efficiency The robust SuperTack coating remains reliably adhesive even after intensive use. With less than 20% loss of adhesion after 300 print runs, the Cool Plate offers an impressive service life. First-class surface quality The SuperTack coating gives the underside of your printed models a smooth, matte finish – ideal for blending perfectly with other surfaces. Energy efficient Thanks to the low heating bed temperature required, the Cool Plate saves energy and does not cause any additional electricity costs. Easy removal of prints To safely remove prints from the Cool Plate, use the included spatula and gently lift the edges. For particularly stuck objects, heat the plate to 50°C to make removal easier. ► Note: Please do not print TPU filaments on the Cool Plate, otherwise the plate could be damaged. Technical specifications: Material: SuperTack coating spring steel plate Material thicknessCoating: 0.05 mm. spring steel plate: 0.4 mm Temperature resistance of the surfaceup to 120 °C Usable build volumeA1 mini: 180 x 180 mm A1, X1 & P1 Series: 256 x 256 mm Due to ongoing optimization of the QR code recognition algorithm on the X1 model, we recommend disabling the build plate position detection.Follow these steps: Controls - Print Options - Enable the detection of build plate position. Considerations The surface is soft. Be careful when using a scraper to remove printed parts.  Do NOT print with TPU filament, as it will damage the build plate. Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion. Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues. Bambu Cool Plate SuperTack is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty. SuperTack provides good adhesion without adhesive or frequent cleaning. You can clean the surface with water and detergent if heavy dirt appears. Do NOT use organic solvents (especially acetone) to clean the build plate, as it will damage the SuperTack surface. Bambu PLA Silk material exhibits strong adhesion on the SuperTack build plate, which may damage printed models. Therefore, we do not recommend using Bambu PLA Silk material on the SuperTack build plate. For users printing with third-party PLA Silk materials, please select the Generic PLA Silk preset in Bambu Studio and evaluate material compatibility based on the specific conditions. Due to ongoing optimization of the QR code recognition algorithm on the X1 model, we recommend disabling the build plate position detection feature in the settings to avoid potential errors. Follow these steps: Controls - Print Options - Enable the detection of build plate position.