Radial StageBug SB-1 Active DI

✅รับส่วนลด 10% สูงสุด 1,000 บาท กรอก ✅รับเงินคืน 15% สูงสุด 1,000 Coin กรอก 📅 ลูกค้าทุกท่านสามารถกดรับโค้ดลดพิเศษได้จากหน้าแจกโค้ดทุกอาทิตย์ - เท่านั้น ⛱ ‘HWVUDTX’ ลด 15% สูงสุด 200.- เมื่อช้อปครบ 400.- ⛱ ‘BPWGJ6G’ ลด 15% สูงสุด 150.- เมื่อช้อปครบ 100.- ⛱ ‘NN6WKT’ ลด 15% สูงสุด 50.- เมื่อช้อปครบ 1.- 📍ตั้งแต่วันที่ 15 ก.พ. 2025 ไดเร็คบ๊อกสำหรับกีตาร์อะคูสติก Radial StageBug SB1, Active direct box , Ultra compact to fit in your guitar case, Plug & play easy to use feature set, 48V phantom powered The Radial SB-1 Acoustic is a high-performance active direct box made for players that are on the move. Made to fit inside a guitar case, the SB-1 is the smallest Radial DI box ever! But don’t let the small size deter… this ultra-compact StageBug sounds absolutely terrific The design begins with standard ¼ instrument input with a thru-put to feed your tuner or your on-stage amp. The ultra-quiet active circuit at once converts the signal from high to low impedance to reduce susceptibility to noise. The signal is then buffered and balanced for long cable runs to the PA system. 48 volt phantom provides the power, so the SB-1 does not require batteries or external supply to make it work. You simply plug in and you are ready to go The active circuit features a carefully selected 800k-ohm input impedance to eliminate problems with loading while delivering a crisp, clear sound to the audio system. This delivers extra sparkle to the top end when interfacing vintage guitars with low output pickups and is particularly handy should you plan to use it for recording or Reamping. The SB-1 is also equipped with a -15dB pad that reduces the input sensitivity to gracefully handle even the loudest active instruments. This makes the SB-1 perfectly well suited for electric bass and keyboards. To reduce feedback, toggling the 180° polarity switch helps eliminate hot spots on stage that can cause low frequency resonance. Features: Active direct box optimized for acoustic guitar -10dB pad buffers against extra-hot active electronics 180-degree phase switch tames hot spots and feedback Runs on 48V phantom power (no batteries needed) Compact design fits in virtually any guitar case Specifications Circuit Type Active buffer with phase splitter Frequency Response 20 Hz to 20 kHz Total Harmonic Distortion <0.006% Dynamic Range >100 dB Input Impedance 800 k / 23 k Maximum Input +2 dBu / +8 dBu Gain +1.3 dBu / +4.4 dB Clipping Level Output: +3.3 dBu / +12.3 dBu Output Impedance 330 Ω Equivalent Input Noise -101 dBu Noise Floor -97 dBu Intermodulation Distortion <0.01% Deviation from Linear Phase 25 / 12° maximum Switches Pad, Phase Functions Automatic merge Input Pad Switch -12 dB XLR Configuration + = Pin 2, – = Pin 3, Ground = Pin 1 Polarity Reverse Yes, 180° Construction 16 gauge steel chassis and outer shell Finish Baked enamel Power 48 V phantom power Dimensions (L x W x D) 4.50 x 1.85 x 1.35″ (11.40 x 4.70 x 3.40 cm) Weight 0.55 lb (0.25 kg) Packaging Info Package Weight 0.65 lb Box Dimensions (LxWxH) 7.3 x 4.6 x 1.7″