Xvive U3 ไวเลส ไมโครโฟน Xvive U3D Dual Plug-On Wireless Audio System for Dynamic Microphones

**สินค้าจะพร้อมส่งช่วงกลางเดือน กย.** ✅รับส่วนลด 10% สูงสุด 1000บาท กรอก 10DDXOCTW5 ✅รับเงินคืน 15% สูงสุด 1000coin กรอก 15CCBOCTW5 📅 วันนี้ - 08 ต.ค. 2024 เท่านั้น ชุดไวเลสสำหรับเปลี่ยนไมโครโฟนธรรมดาให้เป็นไมโครโฟนแบบไร้สาย เหมาะสำหรับไมโครโฟนแบบไดนามิคทั่วไป มาพร้อมระบบ Digital 2.4GHz ความละเอียดเสียงที่ 24-bit / 48kbps หมดปัญหาเรื่องคลื่นที่จะเปลี่ยนไม่คงที่ แบตเตอรี่สามารถใช้งานต่อเนื่องได้ 5 ชั่วโมง เป็นแบบ Recharge ผ่านทางสาย Micro USB . Xvive U3 . Features : 2.4GHz band is optimal for Microphone wireless, approved for use in Europe, South America, Asia and Australia. Working With XLR dynamic microphone and battery-powered condenser microphones. Less than 5ms Latency, Simultaneous broadcasts on 6 channels Broad 20Hz - 20KHz frequency response 5 hours of battery life (Rechageable battery for both Transmitter & Receiver) Up to 90 feet (actual range depends on rf signal absorption, reflection and interference ) High Resolution 24-bit / 48kbps Audio Dynamic Range is 110dB Signal to Noise Ratio is 110dB U3 wireless aims to take the complexity, frustration, out of traditional wireless microphone system. Creating a flexible, all-in-one solution that make any your favorite microphone into wireless. Specs : Wireless 2.4 GHz Tuning Bandwidth 2400 to 2483.5 MHz Frequency Response 20 Hz to 20 kHz (-3 dB) Latency <5 ms Channels Up to 6 simultaneous channels Range Up to 90′ / 27 m Audio High Resolution 24-bit / 48 kb/s Dynamic Range 110 dB SNR 110 dB RF Sensitivity -88 dBm Total Harmonic Distortion 0.2% RF Output Power 10 mW E.I.R.P. max Ports Transmitter: 1 x XLR male input 1 x USBReceiver: 1 x XLR female output 1 x USB Maximum Input Level Mic Mode: 2.8 V p-p Line Mode: 7 V p-p Maximum Output Level 2.8 V p-p Gain Adjustment Range Mic: 0 dB Line: -10 dB Antenna Type 1/4 Wave Sleeve Dipole, non-removable on transmitter and receiver Antenna Impedance 50 Ohms Impedance Transmitter: 15 kOhms, 1 kHz Receiver: 470 Ohms, 1 kHz Battery 3.7 V rechargeable Li-ion, 860 mA for transmitter and receiver Rechargeable Battery Life 5 hours Operating Temperature -0.4 to 134.6°F / -18 to 57°C Housing Molded plastic and cast metal Dimensions Transmitter: 1.2 x 1.1 x 3.9″ / 3.1 x 2.9 x 9.8 cm Receiver: 1.2 x 1.1 x 3.9″ / 3.1 x 2.9 x 9.8 cm Weight Transmitter: 3.3 oz / 93 g Receiver: 3.2 oz / 92 g . Xvive U3D Dual Plug-On Wireless Audio System for Dynamic Microphones . Key Features For Two Dynamic Microphones For Two Active Monitor Speakers Up to Six Simultaneous Systems 20 Hz to 20 kHz Frequency Response Use a pair dynamic microphones at the same time or send audio to active speakers with the Xvive U3D digital wireless audio system. Operating in the 2.4 GHz wireless band, with a 20 Hz to 20 kHz frequency response and less than 5 ms latency, the U3D can be used by presenters, performers, and DJs for a wide variety of applications. System Wireless Technology Digital 2.4 GHz Number of RF Channel Frequencies 6 Included Transmitters 2 x Plug-On Diversity Non-Diversity RF Frequency Band 2400 to 2483.5 MHz Max Operating Range 90′ / 27.4 m (Line of Sight) Max Transmitters per Band 6 Built-In Recorder No Timecode Support No Control App Support No Latency 5 ms Dynamic Range 110 dB Encryption None Receiver Receiver Type Plug-In Mounting Options Plug-In (with Included Hardware) Antenna 2 x 1/4 Wave Sleeve Dipole, Fixed Number of Audio Channels 1 Audio I/O 1 x XLR TRS Male Balanced Mic/Line Output Audio Output Level 2.8 V p-p Phantom Power Protection None Frequency Response 20 Hz to 20 kHz -3 dB Network I/O None Network Protocols None Word Clock I/O None USB/Lightning Connectivity 1 x Micro-USB Female (Charging) Standalone Audio Interface Capable No Impedance XLR Output: 470 Ohms (Balanced) Antenna: 50 Ohms Approximate RF Sensitivity -88 dBm Power Requirements Battery Battery Type 1 x Built-In Rechargeable Internal Battery Capacity 860 mAh Battery Charging Time 2.5 Hour Approx. Battery Life 5 Hour Display & Indicators 3 x LED (Battery Status, Channel, Power, Sync) Housing Metal, Plastic Dimensions 1.2 x 1.1 x 3.9″ / 31 x 29 x 98 mm Weight 0.2 lb / 92 g Transmitter Transmitter Type Plug-On RF Output Power 10 mW (EIRP) Audio I/O 1 x XLR TRS Female Balanced Input (Lockable) Included Cable Connector None Pad None Muting None Audio Input Level 2.8 V p-p (Mic Level) 7 V p-p (Line Level) Auto-Level Control No Gain Range 0 / -10 dB Signal Processing None Frequency Response 20 Hz to 20 kHz -3 dB Sync Method Manual Antenna 1 x 1/4 Wave Sleeve Dipole, Fixed Approximate RF Sensitivity -88 dBm Power Requirements Battery Battery Type 1 x Built-In Rechargeable Internal Battery Capacity 860 mAh Battery Charging Time 2.5 Hours Approx. Battery Life 5 Hours USB/Lightning Connectivity 1 x Micro-USB (Charging) Display & Indicators 3 x LED (Battery Status, Channel, Power, Sync) Housing Metal, Plastic Dimensions 1.2 x 1.1 x 3.9″ / 31 x 29 x 98 mm Weight 3.3 oz / 93 g