Rupert Neve Designs RNDI-M Active Transformer Direct Interface Direct Box D.i. ดีไอ ไดเร็คบ็อกซ์ RNDIM

✅รับส่วนลด 10% สูงสุด 1,000 บาท ✅รับเงินคืน 15% สูงสุด 1,000 Coin 📅 ลูกค้าทุกท่านสามารถกดรับโค้ดลดพิเศษได้จากหน้าแจกโค้ดทุกอาทิตย์ - RNDI-M ให้โทนเสียงและความชัดเจนอันน่าทึ่งของรุ่นอื่นๆ ในรูปแบบที่กะทัดรัดยิ่งขึ้น โดยมีวงจรไฟฟ้าแบบเดียวกันกับ RNDI, RNDI-S และ RNDI-8 ที่ได้รับรางวัล RNDI-M เหมาะกับทุกพื้นที่และช่วยให้นักดนตรีและวิศวกรสามารถสัมผัสพลังเสียงอันไร้ที่ติของ DI จาก Rupert Neve Designs ได้มากขึ้น . FEATURES Groundbreaking Direct Tone When class-A, discrete amplifiers meet Rupert’s custom transformers, amazing things happen. The RNDI-M contains the unique components and design knowledge that make it worthy of the Rupert Neve name. Huge Headroom Maximum input level is a massive +20.5dBu, making the RNDI-M capable of handling not only instruments but also keyboards, drum machines and even pre-recorded material. Rugged Solid Steel Frame The rugged steel chassis is built to withstand the severe stresses of life on the road. Use on a Variety of Sources The RNDI-M has immensely consistent performance across a wide variety of sources due to its 2.2M Ohm discrete FET input stage and high headroom. The RNDI-M can be used with confidence on guitars, synths, basses, acoustic instruments, keyboards & drum machines. Drive Longer Lines The low impedance transformer coupled output – below 40 ohms – is capable of driving long lines while maintaining exceptional high frequency performance. 1/4″ THRU Output The THRU output can be used to maintain optimal input level to an amplifier with no signal degradation. Ground Lift A Ground Lift switch is provided on the rear panel to isolate Pin 1 on the XLR balanced output from the circuit ground to help fix any potential grounding issues. Phantom Powered The RNDI-M is powered by standard 48V phantom power. Power is indicated by a blue LED on the front panel. SPECIFICATIONS Note: All specifications are TYPICAL. Noise (22Hz – 22kHz, Un-weighted) Better than -110dBV Input Impedance (ZIN) Instrument Input: 2.2 MΩ Output Impedance (ZOUT) Less than 40 Ohms Maximum Input Level Instrument Input: +20.5 dBu (8.2 Volts RMS) Maximum Output Level +11.5 dBu Frequency Response +/- 0.25 dB: 28 Hz – 60 kHz +/- 1 dB: 14 Hz – 90 kHz -3 dB: Below 5 Hz Total Harmonic Distortion + Noise (THD+N%) @ 1 kHz, +20 dBu Input Level: 0.25% Typical (2nd and 3rd Harmonic) @ 1 kHz, -20 dBu Input Level: 0.015% Typical (2nd and 3rd Harmonic) @ 20 Hz, -20 dBu Input Level: 0.75% Typical (2nd and 3rd Harmonic) Power Requirements Phantom Powered, 4.5mA @ +48VDC WEIGHTS & DIMENSIONS Product Dimensions (W x D x H): 3.25” (8.25 cm) x 4.75” (12.1 cm) x 1.75” (4.45 cm) Shipping Dimensions (L x W x H): 4.125” (10.5 cm) x 5.125” (13 cm) x 2” (5.1 cm) Shipping Weight: 1.25 lbs. (0.57 kg)