BEHRINGER UCA-222 USB Audio Interface ออดิโออินเตอร์เฟส ความละเอียด 24-bit/192kHz พร้อมปรีไมค์ 2 Input / 2 Output UCA...

BEHRINGER UCA-222 USB Audio Interface +++ รายละเอียดเพิ่มเติม Behringer U-CONTROL UCA222 USB 1.1 Digital Audio Interface USB ออดิโออินเตอร์เฟส BEHRINGER U-CONTROL UCA222, Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output, Optical S/PDIF Output, Includes Software Applications, Mac OS, Windows The U-CONTROL UCA222 from Behringer is a low-cost solution for getting audio in and out of a computer. The USB 1.1 interface is USB bus powered and features two analog RCA phono inputs for connecting any line-level device, such as a mixer or tape deck, and two analog RCA phono outputs for connecting active speakers or studio monitors. The interface also provides a stereo S/PDIF output on an optical connector. Headphone monitoring is via a stereo mini-jack with a dedicated volume control. No special setup or additional drivers are required, and wide computer operating system compatibility is available for both the Mac and Windows platforms. The interface includes a large selection of audio software. Features: USB 1.1 audio interface for connecting instruments, a mixer, consumer audio components with a computer for recording and playback Stereo headphone output with dedicated level control allows for monitoring both input and output Optical S/PDIF output for direct digital conversion Includes energyXT2.5 Behringer Edition music production software, an audio/MIDI sequencer that loads almost instantaneously on all computer platforms Includes Tracktion 4 audio production software via download No additional drivers required Powered via USB – no external power supply Specifications Converters 16-bit Sample Rates 32, 44.1 and 48 kHz Analog Input 2 x RCA phono Analog Output 2 x RCA phono 1 x 1/8″ TRS stereo mini Headphone Digital Input No Digital Output 1 x TOSLink optical S/PDIF MIDI In/Out No Sync In/Out S/PDIF Headphone Output Yes THD + N 0.05% typical @ -10 dBV, 1 kHz Dynamic Range Not specified by manufacturer Frequency Response 10 Hz to 20 kHz, +/-1.0 dB @ 44.1 kHz Power Requirements USB bus System Requirements Mac: G3 300 MHz or higher OS 9.0.4 or higher, 10.x or higher Minimum 128 MB RAM USB 1.1 portPC: Intel or AMD CPU 400 MHz or higher Windows 2000/XP Minimum 128 MB RAM USB 1.1 port