9Barista Spare parts and Gear

1. Espresso cup แก้วเอสเพรสโซ่ 9Barista ขนาด 3oz/90ml 9Barista branded espresso cup ------------------------------- 2. Chimney Anodised aluminium chimney, supplied with two screws. Compatibility: 9Barista Mk.1 9Barista Mk.2 ------------------------------- 3. Chimney A replacement chimney to fit all 9Barista machines. You’ll need to follow our disassembly instructions to remove your old chimney. You will need a T10 Torx screw driver for the screws, which can be re-used. ------------------------------- 4. 53mm Tamper An original 9Barista 53mm tamper. Each 9Barista comes with a tamper as standard. Handle: Black anodised aluminium Base: Stainless steel ------------------------------- 5. Safety ring and seals A safety ring and a pair of seals. Compatible with all 9Barista machines. The safety ring requires two seals when installed, so reuse the seals when installing the second safety ring. The safety ring is a fail-safe device which will safely depressurize the machine if it’s overheated. You’ll know you need to replace the safety ring if you notice water leaking from a small hole on the side of the ring. O-ring seals: Material: Silicone rubber Internal diameter: 9.5mm Cross section: 1.5mm ------------------------------- 6. Valve pin and seal A replacement valve pin and seal for the 9Barista espresso machine. O-ring seal: Material: Silicone rubber Internal diameter: 6mm Cross section: 2mm ------------------------------- 7. Safety Valve (วาล์วระบายความดัน) ใช้ได้กับเครื่องชงกาแฟ 9Barista Mk1 คำเตือน: ควรกดแถบระบายความดันบนวาล์วเฉพาะเมื่อเครื่องชงกาแฟ 9Barista เย็นลงเท่านั้น ปุ่มอาจร้อนจัดขณะเครื่องทำงาน และไอน้ำที่เผาไหม้อาจปล่อยออกมาหากกดก่อนที่เครื่องทั้งหมดจะเย็นลง วาล์วนี้มาพร้อมกับวงแหวนระบายความร้อนตามมาตรฐาน ------------------------------- 8. 9Barista - Upper handle bush ------------------------------- 9. 9Barista - Lower handle bush ------------------------------- 10. 9Barista - Overheat repair kit | Mk.1 This kit contains a complete set of parts to get your machine up and running again. The items included are listed below: 1 x safety valve (assembled with safety ring) 1 x thermal break 1 x group insulator 1 x valve chamber seal 1 x valve pin and seal 1 x Mk.1 boiler O-ring 1 x upper chamber O-ring 1 x valve body seal 1 x main valve spring (The Grouphead o-ring is not included) You will also need a 3mm Allen/hex, and a 13mm spanner/wrench to open the machine up and replace the components. Instructions on how to do this can be found here. It is worth checking ,prior to purchasing, that your heat transfer plate is not damaged or warped in any way as this can also impact the performance of the machine. Compatibility:  9Barista Mk.1